SIEMENS HEALTHCARE
ATELLICA CH 930 · Chemistry
Related Cybersecurity Alerts
Recalls (10)
(1)Software (SW) versions V1.25.1 and lower may result in TDef (Test Definition) Parameters for Open Channel Assays reverting to Default Value would shift test results by the magnitude of the implemented Assay Correlation factor; (2) On Board Stability (OBS) Not Updating with Manual Change for Open Channel Assays may continue to use the reagent past its expiration date leading to potential erroneo…
Valves used on the Atellica CH 930, Atellica IM 1300 and Atellica IM 1600 analyzers may develop a malfunction due to a manufacturing defect and may result in the valve wearing and leaking over time. The leaking is a risk in valves subject to high pressure or high wear and may impact the result accuracy of any assay.
Photometer Lamp May Reach Saturation Without Flagging Results, may generate erroneously elevated or depressed patient results
Multiple issues in Software v1.23.2 and lower-may lead to the reporting of discrepant patient results
Editing an assay Test Definition and switching to another assay s Test Definition screen without saving the changes using the save button on the screen, may corrupt the settings of the assay s test definition, and Auto-Rerun or Auto-Dilution results may generate a result of Zero (0) for quantitative assays or Negative for qualitative assays if a well of the reagent pack is not calibrated.
On the Atellica CH 930 Analyzer, when scanning barcodes at the module console for Integrated Multisensor Technology (IMT) system fluids (Standard A (Std A) and Standard B (Std B)) for Sodium (Na), Potassium (K), and Chloride (Cl), the system will translate the decimal point separators to commas. This will result in invalid concentration values for the fluids, therefore the system will utilize defa…
Potential for calibration error resulting in QC failures after the calibration run with QC and patient results being 5 times higher.
Atellica CH 930 Analyzer - Erroneous Indices for Hemolysis and Lipemia in Software versions 1.19.2 and below
Multiple Issues Identified in Atellica Solution System Software in V 1.14.2 and lower in: Atellica IM 1300 Analyzer Atellica IM 1600 Analyzer;Atellica CH 930 Analyzer; Atellica Sample Handler Prime
Atellica Solution system software (SW) version 1.13 and lower, five (5) behavioral issues were identified: 1. Reagent Lock may not work as intended with Primary Reagent ReadyPacks and Ancillary Packs when more than one (1) lot of specific Reagent kits are loaded on the analyzer at the same time. 2. Sample barcodes may be incorrectly read 3. The Atellica IM 1300 Analyzer and Atellica IM 1600 Analyz…
UDI Registrations (1)
Atellica CH 930 Analyzer
MAUDE Adverse Events (10)
FDA Classification (67)
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry
Clinical Chemistry